Water Damage Restoration – A SHORT Preview

By | April 12, 2021

Water Damage Restoration – THE FACTS?

It is the procedure for repairing a house or home to its pre loss condition. Damage to the property could be because of an overflow, flood or any other water damage event. The water damage restoration process involves several essential procedures like loss evaluation, categorization in line with the water contamination levels, decontaminating and drying the construction, monitoring of the process and completion of the procedure. There are two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning up and Restoration Certification) and the RIA (Restoration Industry Association) that recommends requirements for water damage and mold restoration. The S500 damage because of water guide is the benchmark tool that is utilized by companies that specialize in restoration of water damage.

Loss Assessment and Categorization

Loss evaluation is the first and the most important step in water damage and mold restoration. The assessment has to be correct so that an appropriate response can be taken. In restorating the destruction due to water, technicians and the insurance companies must work together and know very well what is damaged and how to start restoring the damage. Identifying the source of the destruction, documentation of damage, and exact estimates are mandatory for a proper water damage restoration. Categorization is founded on the contamination degrees of the water source. The classes are listed below

Category 1 – This is water from clean resources like pipes, sinks and toilets without faeces or urine.

Category 2 – That is water which has some contaminants like water from a dishwasher, washer or toilet with urine.

Category 3 – That is water that is highly unsanitary and is capable of causing illness or passing away if ingested. Sewage water, drinking water from toilet with faeces, standing water with microbial development and floodwater are some examples.

Decontamination and Drying

After the evaluation is complete, the procedure of drying and decontaminating commences at the site. In line with the extent of damage, harm caused due to water can be classified into 4 types. Class 1 Damage- When loss is fixed to a little area and less normal water has been absorbed by materials. This results in gradual evaporation rate. Class 2 Damage – Once the damage is to the entire room and carpet area. Class 3 Damage – When the entire region is saturated with drinking water and Class 4 Harm – when there are plenty of strong saturation pockets. Decontamination and drying is really a key stage in Water damage and mold restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments need to be used. Decontamination should be done if contamination has happen to be detected in the area. Decontamination may be done for the whole area or in particular pockets where contamination has been detected.